Ricoh FAX7000L, Field Service Manual

Page: 117 / 377

SCU Bit Switch 13
BIT FUNCTION
DATA COMMENTS
0 TTl letter size
0: Normal This determines the size of letters in the TTI printed at the
1: Half size
other end.
1 Address label in-
0: Enabled If this bit is 0, the address label the user programmed as an
clusion in the TTl 1: Disabled
option in Quick and Speed Dial programming will be included
in the TTI sent to the other end. This address label can take
the form of a message up to 8 lines long; it is not the same as
the address label that is displayed on the LCD during dialling.
2 File number in the
0: Included If this bit is 0, the hard disk file number is printed on mes-
TTl 1: Not included
sages received at the other end. Even if non-memory trans-
mission is used, there will be a file number.
3 Not used
Do not change the factory setting.
4 Not used Do not change the factory setting.
5 Not used Do not change the factory setting.
6 Not used Do not change the factory setting.
7 Not used Do not change the factory setting.
2-65