Ricoh FAX7000L, Field Service Manual

Page: 67 / 377

No Function Details
03 RAM (continued) 3: G3 CCU Handshake List - Use this to print a table of software
commands that recently passed between the SCU and the G3
CCU. Send this list to Ricoh Technical Services if there is an unsolv-
able hardware or communication problem. See page 2-27.
4: SPU Handshake List - Use this to print a table of software
commands that recently passed between the SCU and the SPU.
Send this list to Ricoh Technical Services if there is an unsolvable
hardware problem. See page 2-27.
5: Error Code Logging - Send this list to Ricoh Technical Services
if the machine is defective and cannot be repaired. See page 2-28.
6: Multicopy - Use this to determine how many copies of each
received page is printed. See page 2-28. Bit 1 of SCU bit switch 18
must be set to 1 for this feature to work.
7: Counter Check - Use this to check and/or alter the Toner End,
Toner Full, and Master counters. See page 2-29.
9: Charge Control - Use this to enter charge control parameters.
See section 1-8.
04 Service Station Number
05 Counter Check
06
Service Monitor Report
Use this to program the service station number. The machine auto-
matically calls this number when there is an Auto Service Call con-
dition. See page 2-30.
Use this to check and/or alter the Scan, Print, Tx, and Rx counters.
See page 2-30.
This report lists the most recent error codes and gives information
on the most recent communications that experienced errors. See
page 2-31.
2-15