Ricoh FAX7000L, Field Service Manual

Page: 66 / 377

2-3. Service Level Functions
2-3-1. Function List
No
Function Details
01
Bit Switches
Use this function to change a bit switch setting. See page 2-19.
02 CCU 0: G3 test - Use this to test tone generation. See page 2-20.
1: G3 dump 1 - Use this to print a protocol dump list for com-
munication troubleshooting. Forward the printout to Ricoh
Technical Services for assistance. See page 2-22.
2: G3 dump 2 - Use this to print a table of recent software com-
mands. Send this list to Ricoh Technical Services if there is a
communication problem. See page 2-22.
3: NCU data - Use this to adjust NCU parameters for ringing detec-
tion and auto-dialling. See page 2-23.
03
RAM
0: RAM read/write - Use this to display the contents of a RAM ad-
dress, and to change the data if necessary. This function cannot
be used to rewrite remote terminal RAM. See page 2-24.
1: Memory dump - Use this to print a table of RAM address con-
tents. See page 2-25.
2: Hard disk dump - This function is intended to help find
problems with missing files. With the help of Ricoh Technical Ser-
vices, use it to print the contents of a hard disk sector in hex code.
This function is unlikely to be practical in the field. See p. 2-26.
Continued on the next page
2-14