Ricoh FAX7000L, Field Service Manual

Page: 162 / 377

G3 CCU Bit Switch 39
BIT FUNCTION
DATA COMMENTS
0
Line current detec- 0: Enabled
Some countries require line current detection. To enable line
tion 1: Disabled
current detection, set this bit to 0 then program the RAM ad-
dresses containing line current detection parameters.
1 PSTN dial tone
0: Enabled Some countries require PSTN dial tone detection. To enable
detection 1: Disabled PSTN dial tone detection, set this bit to 0 then program the
RAM addresses containing PSTN dial tone detection
parameters.
2 PABX dial tone
0: Enabled Some countries require PABX dial tone detection. To enable
detection 1: Disabled PABX dial tone detection, set this bit to 0 then program the
RAM addresses containing PABX dial tone detection
parameters.
3 Busy tone detection 0: Enabled
Some countries require busy tone detection. To enable busy
1: Disabled tone detection, set this bit to 0 then program the RAM addres-
ses containing busy tone detection parameters.
4 Not used Do not change the factory setting.
5
Not used
Do not change the factory setting.
6 Action if the user
0: All numbers dialled 0: The machine will dial all numbers entered by the user
presses Stop 1: Dialling stops imme-
before Stop was pressed, then transmission will stop.
during manual diall- diately 1: Dialling will stop immediately after the user presses Stop.
ing (with handset)
7 Not used Do not change the factory setting.
2-110