Ricoh FAX7000L, Field Service Manual

Page: 150 / 377

G3 CCU Bit Switch 11
BIT
FUNCTION
DATA COMMENTS
0 Automatic voice 0: Enabled If this bit is 0 and a voice message is programmed, the
message 1: Disabled machine will send the voice message if a telephone user calls
the machine by mistake. The message can then warn the
other end to hang up before it sends the modem tones. This
bit changes when the user switches voice message on/off.
1 Not used
Do not change the factory setting.
2 Not used Do not change the factory setting.
3 Not used Do not change the factory setting.
Attenuation for automatic voice message (dB)
4 Bit 7 Bit 6 Bit 5 Bit 4 Attenuation These bits determine how much the Tx Hybrid IC (HIC 2) on
0 0 0 0 0 the G3CCU board attenuates the voice message.
5
6
to
7
1 1 1 0 -14
1 1 1 1 -15
2-98