Ricoh FAX7000L, Field Service Manual

Page: 68 / 377

No
Function Details
07 Parameter List This report lists information such as bit switch settings and current
counter values. See page 2-31.
08 Serial Number
Use this to program the machine’s serial number. This number is
used by the Auto Service Call administration system. See page 2-
32.
09
Tests
0: Printer test patterns. See page 2-32.
1: Scanner - 0: Fluorescent lamp lighting. See page 2-33.
- 1: SPU Reset - Use this to reset the machine after
clearing an Auto Service Call condition. See p. 2-34
2: Operation panel test - Use this to check the operation of the
operation panel LEDs. See page 2-34.
3: RAM test - Use this to test the function of the various RAM
chips inside the machine. See page 2-35. Note that the tested
RAM will be cleared.
4: DCR test - Use this to test the function of the data compres-
sion/reconstruction chips on the SCU. This function does not test
the DCR chip on the VPU. See page 2-36.
5: ADF mechanism test - See page 2-36.
6: SPU tests - There are three tests to check motor operation,
master home position detection, and charge corona operation.
See page 2-37.
7: Hard disk tests - Factory use only. Do not use.
10 Not used
2-16