Ricoh FAX7000L, Field Service Manual

Page: 121 / 377

SCU Bit Switch 16
BIT FUNCTION DATA COMMENTS
0
Page retransmis-
0: Enabled 0: In memory or in non-memory transmission, if the other end
sion 1: Disabled returns a negative receipt signal, the machine will try to
resend the page from memory. Page retransmission is not
done if ECM is enabled, as ECM is a more efficient retransmis-
sion method.
1 Not used
Do not change the factory setting.
2 Not used
Do not change the factory setting.
3 Dialling at the 0: Enabled 1: Numbers cannot be dialled at the fax machine’s built in
machine’s ten-key 1: Disabled telephone keypad if the handset connected to the machine is
pad when the hand- off-hook.
set is off-hook
4 Action if Redial is 0: Normal 0: If the Redial key is pressed to redial a destination that was
pressed after chain 1: Limited input by chain dialling (using more than one Quick Dial/Speed
dialling Dial to dial a destination), the whole chain will be redialled.
1: Only the number stored in the first part of the chain will be
redialled. For example, a number could be dialled by pressing
three Quick Dial keys; the first key holding the international
dial access code, the second holding the country code, and
the third the area code and number. If this bit is at 1, only the
international dial access code would be redialled.
5
Not used Do not change the factory setting.
6 Not used Do not change the factory setting.
7 Not used Do not change the factory setting.
2-69