Ricoh FAX7000L, Field Service Manual

Page: 305 / 377

4. Error Codes
4-1. Power-up Error Codes
Code Meaning Suggested Action
10
During system reset (power up, or 1. Check the SCU/SPU and SPU/hard disk connections.
pressing Stop for 10 s), no 2. Replace the SPU.
response came from the hard disk 3. Replace the hard disk.
controller (on the SPU), or the
response was in error
12 Abnormal completion of disk format- Try to format the disk again. If the same error occurs, do the
ting
same steps as for error code 10.
13 Disk I/O error during system reset See error code 10.
14 Address label data error during sys-
Try Function 3 (File Correction). If the same error occurs after
tem reset
that, try Function 6 (Clear Address). If that fails, see error
code 12.
15
Job file data error during system Try Function 3 (File Correction). If the same error occurs after
reset
that, try Function 7 (Clear Job). If that fails, see error code 12.
16
See error code 13. See error code 13.
20 Disk formatting error See error code 10
5-70