Ricoh FAX7000L, Field Service Manual

Page: 133 / 377

SCU Bit Switch 31
BIT FUNCTION DATA COMMENTS
Maintenance interval (Unit = ’000 copies)
0 Bit 2 Bit 1 Bit 0
0 0 0
1 0 0 1
0 1 0
2
0 1 1
1 0 0
1 0 1
1 1 0
1 1 1
Interval When the maintenance interval has expired, the machine will
7
send an Auto Service Call report to the service station. The
10
report will contain a message informing the service center that
15
maintenance is due.
20
(1, 1, 1) - No preventive maintenance
30
40
60
Never
3
Inclusion of
0: No 1: Yes
If the master belt is to be replaced by the user, set this bit to 0.
Replace Master in
Otherwise, set this bit to 1; if this bit is 1, the machine will send
the Auto Service an Auto Service Call report to the service station whenever the
Call conditions master belt needs replacing.
4 Master unit replace- 0: Service level If the master belt is to be replaced by the user, set this bit to 1.
ment level 1: User level If this bit is 0, the master belt rotation counter can only be
reset (using Function 99) by service personnel. Bits 4 and 5
must be set to the same value, and bit 3 must be the opposite
value.
5
Replace Master in- 0: Disabled If the master belt is to be replaced by the user, set this bit to 1.
dicator 1: Enabled If this bit is 0, the Replace Master indicator will not light up
when it is time to replace the master unit. Bits 4 and 5 must be
set to the same value, and bit 3 must be the opposite value.
Continued on the next page
2-81