Ricoh FAX7000L, Field Service Manual

Page: 106 / 377

SCU Bit Switch 06
BIT FUNCTION DATA COMMENTS
Resolution default setting
0 Bit 1 Bit 0 Setting These bits state the default resolution setting. The machine’s
0 0 Standard resolution returns to this setting when power is switched on
1 0 1 Detail
and when the machine returns to standby after transmission.
1 0 Super Fine If (1, 1) is selected, a) the resolution will always reset to Stand-
1 1
No default
ard if the power is switched off/on, b) on returning to standby,
the resolution will remain at the setting used for the transmis-
sion.
Default resolution setting used for copy mode
2 Bit 3 Bit 2
Setting
These bits state the resolution used when the user presses
0 0 Standard the Copy key. The machine will return to the standby default
3 0 1 Detail setting after copying. If (1, 1) is selected, on returning to
1 0 Super Fine
standby, the resolution will remain at the setting used for copy-
1
1 No default
ing.
Contrast default setting
4
Bit 5 Bit 4 Setting
These bits state the default contrast setting. The machine’s
0 0 Normal
contrast returns to this setting when power is switched on and
5 0 1
Lighten when the machine returns to standby after transmission. If
1 0
Darken (1, 1) is selected, a) the contrast will always reset to Normal if
1 1 No default
the power is switched off/on, b) on returning to standby, the
contrast will remain at the setting used for the transmission.
Continued on the next page
2-54