Richter SAFERUN Installation And Operating Manual Download Page 41

Page: 41 / 76

Installation

ID-No. 9230-070-en

Version 1.14 (2019-05)

Page 41

5.5

Electrical connection

5.5.1

Connect converter SAFERUN® CMS-T to can SAFERUN® CMS-S

Connecting the

SAFERUN

® CMS-S to the

SAFERUN

® CMS-T is via a

screwable industrial connectors.

CAUTION

Possible damage to the converter SAFERUN

CMS-T!

The converter

SAFERUN

® CMS-T may only be con-

nected to the original CMS-S

SAFERUN

® of the com-

pany Richter.

NOTE

Even if all the connection points of the system are

backed up for exceeding the permissible limits, the

presence or unscrewing the connection cable should

be avoided during operation.

NOTE

►

The can

SAFERUN

® CMS-S must already be in-

stalled in the pump.

►

The connector of the can

SAFERUN

® CMS-S is

(seen from motor direction) by default on the

right side.

Summary of Contents for SAFERUN













































































Search results

Summary of Contents for SAFERUN

Reviews:

Related manuals for SAFERUN

Brands by name

Popular brands

Richter SAFERUN, Installation And Operating Manual

Search results

Summary of Contents for SAFERUN

Reviews:

Related manuals for SAFERUN

Brands by name

Popular brands