Page 6
Version 1.14 (2019-05)
ID-No. 9230-070-en
1
General
1.1
About this Manual
These installation and operating instructions is part of pump
monitoring
SAFERUN
® and describes the proper and safe use of
the equipment in all operating phases.
SAFERUN
® determined via sensors in the can the current operat-
ing status of the connected pump. The actual measured values
are compared to the set operating characteristic curve. The oper-
ating point of the pump is indicated via LEDs on the converter and
passed down through the current interface to a superordinate
control system. Also measured values of the system are transmit-
ted via HART protocol via this interface.
In addition, the measured values in a data memory (History Log)
are collected and can be read for later analysis via the radio inter-
face (RFID).
1.1.1
How To Use
The staff responsible for the installation, operation and mainte-
nance of the unit must have read and understood the operating
instructions before starting work.
In addition to this installation and operating instructions and the
operating instructions for the pump as well as the instructions
given in the Annex of additional components are decisive.
When references to other documents, the safety information
contained therein must be observed.
The illustrations in this manual are provided for basic understand-
ing and are not necessarily to scale.
1.1.2
How To Store
The operating instructions are part of the appliance and must be
kept accessible at all times for the staff.
