Richter SAFERUN Installation And Operating Manual Download Page 18

Page: 18 / 76

Safety

Page 18

Version 1.14 (2019-05)

ID-No. 9230-070-en

Make sure that trainee, personnel to be taught, instructed or as

part of a general education only operate under the constant su-

pervision of an experienced person on the machine.

DANGER

Fatal if insufficient

qualifying!

Improper handling of and on the machine can result in

significant personal injury and damage.

►

All work carried out has to be done only by

qualified personnel.

NOTE

In the selection of personnel observe the applicable

age and occupational regulations!

2.6.2

Unauthorized

WARNING

Threat for and by unauthorized!

Unauthorized persons who do not meet the require-

ments described, cannot know the hazards in the work

area.

►

Keep unauthorized persons away from the

work area.

►

When in doubt speak to persons and send

them off the work area.

►

Interrupt work as long as unauthorized persons

staying in the workspace.

2.6.3

Instruction

Personnel must be instructed by the operator regularly.

NOTE

In order to better track the implementation of the

instructions and log can be acknowledged by the

participants against signature.

2.7

Personal protective equipment

When working on the device by the operator prescribed for the

place where the equipment protective clothing must be worn by

persons.

Summary of Contents for SAFERUN













































































Search results

Summary of Contents for SAFERUN

Reviews:

Related manuals for SAFERUN

Brands by name

Popular brands

Richter SAFERUN, Installation And Operating Manual

Search results

Summary of Contents for SAFERUN

Reviews:

Related manuals for SAFERUN

Brands by name

Popular brands