Richter SAFERUN Installation And Operating Manual Download Page 71

Page: 71 / 76

Dismantling, storage and disposal

ID-No. 9230-070-en

Version 1.14 (2019-05)

Page 71

8.3

Dismantling

Perform the disassembly of the converter

SAFERUN

® CMS-T as

follows:
Switch off power supply and secure against reconnection.
Disconnect power cable and secure and insulate open ends

against short circuit.
Loosen the sensor cable.
Unscrew the

SAFERUN

® CMS-T converter from the retaining

plate.

8.4

Storage

If the device is not required for a long time, the converter

SAFERUN

® CMS-T has to be cleaned as described in the section

Cleaning.
Keep the converter

SAFERUN

® CMS-T and all accessories in a dry,

clean and frost-free place.

8.5

Returning the converter SAFERUN® CMS-T

When returning the converter

SAFERUN

® CMS-T for repair or in-

spection, the device is accompanied by a detailed description of

the fault.

8.6

Disposal

This device is subject to the WEEE directive 2002/96 / EC and na-

tional laws. Pass the instrument directly on to a specialized recy-

cling company and do not use for the municipal collecting points.
Correct disposal avoids negative effects to persons and environ-

ment and ensures recycling of useful raw materials.
materials: see chapter „Technical data“

Summary of Contents for SAFERUN













































































Search results

Summary of Contents for SAFERUN

Reviews:

Related manuals for SAFERUN

Brands by name

Popular brands

Richter SAFERUN, Installation And Operating Manual

Search results

Summary of Contents for SAFERUN

Reviews:

Related manuals for SAFERUN

Brands by name

Popular brands