Richter SAFERUN Installation And Operating Manual Download Page 12

Page: 12 / 76

Safety

Page 12

Version 1.14 (2019-05)

ID-No. 9230-070-en

Safety

This chapter provides important information on all safety aspects

for optimal protection of personnel as well as safe and trouble-

free operation.
In addition to the specified in this chapter, basic safety precau-

tions and instructions to special risks which are relevant for the

safe handling of safety instructions are given in each action chap-

ter.
Any hazards which could occur during a specific action step are

described of each action step.

DANGER

Risk of death by non-observance of safety in-

structions!

Failure to comply with the safety and handling instruc-

tions specified in these operating instructions danger-

ous situations can arise.

►

Follow all warnings and instructions listed

here.

►

When referencing other documents also refer

to the safety instructions contained therein.

Moreover, the country-specific installation standards apply (eg in

Germany VDE regulations) as well as the applicable safety regula-

tions, operational safety regulations and accident prevention reg-

ulations for the application of the device.

Summary of Contents for SAFERUN













































































Search results

Summary of Contents for SAFERUN

Reviews:

Related manuals for SAFERUN

Brands by name

Popular brands

Richter SAFERUN, Installation And Operating Manual

Search results

Summary of Contents for SAFERUN

Reviews:

Related manuals for SAFERUN

Brands by name

Popular brands