Richter SAFERUN Installation And Operating Manual Download Page 38

Page: 38 / 76

Installation

Page 38

Version 1.14 (2019-05)

ID-No. 9230-070-en

Installation

5.1

Notes on safety

The equipment is an intrinsically safe electrical apparatus of cate-

gory 2 and approved under EC-Type Examination Certificate for

the following areas:

■

Installation in Zone 1 and 2 of potentially explosive atmos-

pheres,

■

with intrinsically safe circuits in Category 2 with protection

level "ib" the hazardous area.

Note the following safety instructions when installing the appli-

ance:

DANGER

Risk of electrocution!

Upon contact with live wires or components can be fa-

tal!

►

Switch off electrical supply before starting

work and secure against reconnection.

WARNING

Injury due to improper assembly and installa-

tion!

Improper assembly and installation can lead to serious

injury or damage.

►

Before starting work ensure sufficient instal-

lation clearance.

►

Pay attention to tidiness and cleanliness at

the installation location! Loosely stacked or

scattered components and tools are sources

of accidents.

►

Install the components professionally.

►

The operator has to wear the protective

clothing prescribed for the place of the

equipment.

Summary of Contents for SAFERUN













































































Search results

Summary of Contents for SAFERUN

Reviews:

Related manuals for SAFERUN

Brands by name

Popular brands

Richter SAFERUN, Installation And Operating Manual

Search results

Summary of Contents for SAFERUN

Reviews:

Related manuals for SAFERUN

Brands by name

Popular brands