Richter SAFERUN Installation And Operating Manual Download Page 11

Page: 11 / 76

General

ID-No. 9230-070-en

Version 1.14 (2019-05)

Page 11

1.4

Copyright

This documentation is protected by copyright.
All rights, including those of photomechanical reproduction, the

duplication and distribution via special processes (eg data pro-

cessing, data carriers, data networks), even partially, as well as

substantive and technical changes.

1.5

Product Information

Richter Chemie-Technik GmbH

Otto-Schott-Str. 2
D-47906 Kempen
Telephone : +49 (0) 2152 146-0
Fax:

+49 (0) 2152 146-190

E-Mail:

[email protected]

Internet:

1.6

Richter Service

For technical questions about the device, we ask you to contact

directly with the manufacturer. (Address see section 1.5).
Please keep in this case the following information ready:

■

commission number (XX-XXXXXX-XX-XX)

■

Device name and type of pump

The required disclosures are on the pump nameplate.

Summary of Contents for SAFERUN













































































Search results

Summary of Contents for SAFERUN

Reviews:

Related manuals for SAFERUN

Brands by name

Popular brands

Richter SAFERUN, Installation And Operating Manual

Search results

Summary of Contents for SAFERUN

Reviews:

Related manuals for SAFERUN

Brands by name

Popular brands