Richter SAFERUN Installation And Operating Manual Download Page 43

Page: 43 / 76

Installation

ID-No. 9230-070-en

Version 1.14 (2019-05)

Page 43

5.5.2

Connect converter SAFERUN® CMS-T to power supply

The connection of the

SAFERUN

® CMS-T to the voltage supply is

done via the terminal strip inside the

SAFERUN

® CMS-T.

CAUTION

Possible damage to the converter SAFERUN

CMS-T!

The converter

SAFERUN

® CMS-T may only be con-

nected to a power supply that corresponds to the spec-

ified in the technical data specifications.

The pump monitoring system

SAFERUN

® can be used in non-haz-

ardous areas and with appropriate power supply even in hazard-

ous areas.

NOTE

►

The outer diameter of the connection cable

must have a diameter of 6 mm to 9 mm, to

ensure a seal effect of the cable gland IP65

(EN 60529).

►

For intrinsically safe power supply of the con-

verter

SAFERUN

® CMS-T it is recommended

to use a shielded cable installation. The

screen can be placed either one or both sides

to ground potential or to the terminal 9

"screen", depending on the shade concept of

the operator.

Summary of Contents for SAFERUN













































































Search results

Summary of Contents for SAFERUN

Reviews:

Related manuals for SAFERUN

Brands by name

Popular brands

Richter SAFERUN, Installation And Operating Manual

Search results

Summary of Contents for SAFERUN

Reviews:

Related manuals for SAFERUN

Brands by name

Popular brands