Richter SAFERUN Installation And Operating Manual Download Page 14

Page: 14 / 76

Safety

Page 14

Version 1.14 (2019-05)

ID-No. 9230-070-en

2.2

Specific hazards

The device itself is not harmful. Depending on the location, spe-

cial safety regulations for occupational safety and accident pre-

vention regulations for the application of the device shall apply.
The device meets the requirements set out in Directive 94/9 / EC

(ATEX 95) for use in explosion-proof environment. The examina-

tion certificate is annexed.

DANGER

Danger to life from non-compliance with safety

instructions when operating in an explosive en-

vironment!

Failure to comply with the safety and handling instruc-

tions specified in these operating instructions dangerous

situations can arise.

►

Follow all warnings and instructions listed

here.

►

When referencing other documents also refer

to the safety instructions contained therein.

NOTE

Notes on safety in potentially explosive environments

are identified by this symbol especially.

Summary of Contents for SAFERUN













































































Search results

Summary of Contents for SAFERUN

Reviews:

Related manuals for SAFERUN

Brands by name

Popular brands

Richter SAFERUN, Installation And Operating Manual

Search results

Summary of Contents for SAFERUN

Reviews:

Related manuals for SAFERUN

Brands by name

Popular brands