Richter SAFERUN Installation And Operating Manual Download Page 22

Page: 22 / 76

Page 22

Version 1.14 (2019-05)

ID-No. 9230-070-en

2.9

Ban on conversions

Any conversions and modifications on the device are forbidden.
The manufacturer assumes no liability for any resulting damages.

2.10

Spare parts

WARNING

Injury due to incorrect or faulty spare parts!

Wrong or faulty spare parts may result in injury, dam-

age, malfunction or total failure and compromise safety.

►

Only use original spare parts from the manu-

facturer.

2.11

Environmental notes

CAUTION

Environmental hazard due to incorrect han-

dling of environmentally hazardous sub-

stances!

A wrong handling of environmentally hazardous sub-

stances, particularly improper disposal, significant

damage to the environment can arise.

►

Observe the disposal instructions given in this

manual.

Summary of Contents for SAFERUN













































































Search results

Summary of Contents for SAFERUN

Reviews:

Related manuals for SAFERUN

Brands by name

Popular brands

Richter SAFERUN, Installation And Operating Manual

Search results

Summary of Contents for SAFERUN

Reviews:

Related manuals for SAFERUN

Brands by name

Popular brands