Richter SAFERUN Installation And Operating Manual Download Page 69

Page: 69 / 76

Dismantling, storage and disposal

Page 69

Version 1.14 (2019-05)

ID-No. 9230-070-en

Dismantling, storage and disposal

8.1

Notes on safety

Note the following safety instructions when installing the appli-

ance:

DANGER

Risk of electrocution!

Upon contact with live wires or components can be fa-

tal!

►

Switch off electrical supply before starting

work and secure against reconnection.

WARNING

Risk of injury due to improper installation!

Improper installation can result in serious injuries or

property damage.

►

Before starting work ensure sufficient instal-

lation clearance.

►

Pay attention to tidiness and cleanliness in

the workplace! Loosely stacked or scattered

components and tools are sources of acci-

dents.

►

Dismantle components professionally.

►

The operator has to wear the protective

clothing prescribed for the place of the equip-

ment.

Summary of Contents for SAFERUN













































































Search results

Summary of Contents for SAFERUN

Reviews:

Related manuals for SAFERUN

Brands by name

Popular brands

Richter SAFERUN, Installation And Operating Manual

Search results

Summary of Contents for SAFERUN

Reviews:

Related manuals for SAFERUN

Brands by name

Popular brands