19
1.800.627.4499
DN-Series Integrated Programmable Controls
DOAS
Select Internet Protocol 4 and click on Properties.
Enter the IP address you want to use. It should not be identical to the controller IP address. The
last octet of the IP address should be different. Click OK.
2.1.4 Using the Multikey Function of the Web Pages
When you want to press multiple keys or press a key longer for a function you can use the keys
below the Menu Screens to do this.
Two common uses are:
u
Set the two keys to Alarm and Alarm and press
Simulate long press
to acknowledge alarms.
u
Set the two keys to Alarm and Enter and press
Simulate long press
to get to system menus.
CONTROLLER OVERVIEW
NOTE: When you are
finished viewing the
controller on
your computer,
remember to restore the
original settings.
2.2 CONTROLLER MENU STRUCTURE
Any screen will have the name of the menu to which it belongs on the top line of the screen.
2.2.1 User Menu Structure
The user menu can be reached but pressing the ESC (back) button. The menus contain the
following areas:
u
Unit Status
—Contains the status values of the sensors, fans, and heating and cooling,
if applicable
u
Control Settings
—Contains the control settings for the fans and heating and cooling,
if applicable
u
General Settings
—Contains the clock settings, Unit of Measures, IP Address, BMS settings,
and the scheduler
u
Alarm Settings
—Contains the alarm settings
u
Unit On/Off
—Allows the user to turn the unit on and off via the keypad
