1.800.627.4499
DN-Series Integrated Programmable Controls
DOAS
148
16.5 VFD INFORMATION
REFERENCE
The following information is for reference only. All of the VFD control is done by the RenewAire
system and the settings are pre-set in the factory and should not be altered.
16.5.1 ABB VFD Information
This drive is used on DN DOAS Units with VFDs. ABB ACS320 VFDs are generally supplied in
indoor units and ABB N831 VFDs in rooftop units.
FIGURE 16.5.0 MODEL ACS320 SHOWN
FIGURE 16.5.1 VFD KEYPADS IN EBOX
16.5.1.1 ABB VFD Parameters
VFD Parameters are instructions that the Variable Frequency Drives follow. They are factory set
and should not be changed unless you are instructed to do so by TSS.
To view the VFD’s Parameters from the keypad, press the “MENU” softkey. Press up/down
arrows to highlight PARAMETERS, then select it by pressing the “ENTER” softkey.
16.5.1.2 View All Parameters
VFD must be powered up to view the parameters.
UP/DOWN BUTTON
SOFTKEY
HELP KEY
"HAND"
SOFTKEY
"AUTO"
"OFF"
FIGURE 16.5.2 ABB KEYPAD BUTTONS
