1.800.627.4499
DN-Series Integrated Programmable Controls
DOAS
142
REFERENCE
16.4 DN-SERIES FULL CONFIGURATION CODE
DN MODELS
CONFIGURATION GUIDE
Note: Not all options are available on every model.
For Technical Support E-mail: [email protected]
To Place an Order E-mail: [email protected]
MODEL NUMBER
D N -
- J
-
- -
DIGIT NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Digits 1–5:
Model
Digit 17:
Heating (See Restrictions 3, 16, & 21)
"DN-2-" = 1,650 CFM
"-" = None
"DN-3-" = 3,300 CFM
"E" = Electric Heater
"DN-5-" = 4,950 CFM
"G" = Gas Heat Module
"P" = Heat Pump
Digit 6:
Exchanger Type
"S" = Steam
"J" = G5 Core
"H" = Hot Water
Digits 7–8:
Location (See Restriction 1)
Digit 18:
Heater Size (See Restrictions 4, 8, 9, 10, 11, 12, 13, & 14)
"IN" = Indoor
"-" = None
"RT" = Rooftop
"1" = Gas 50 MBH or Electric 5kW
"2" = Gas 75 MBH or Electric 10kW
Digit 9:
SA Fan Location (See Restrictions 18 & 19)
"3" = Gas 100 MBH or Electric 15kW
"B" = Before Coil (Standard)
"4" = Gas 125 MBH or Electric 20kW
"A" = After Coil
"5" = Gas 150 MBH or Electric 25kW
"6" = Gas 200 MBH or Electric 30kW
Digit 10:
Orientation
"7" = Gas 250 MBH or Electric 40kW
"A", "B", "C", "D", "E", "G", "J", "K", "L", "M", "N", "P", (Indoor Units ONLY)
"8" = Gas 300 MBH or Electric 50kW
"V", "H", "R", "F"
"9" = Gas 350 MBH or Electric 60kW
Digit 11:
Insulation
Digit 19:
Fan Control (See Restrictions 5 & 6)
"1" = 1 inch
"E" = ECM
"2" = 2 inch with Thermal Break
"V" = VFD
Digit 12:
Phase (See Restriction 15)
Digit 20:
Unit Fusing
"1" = Single Phase
"N" = Non-Fused (Standard)
"3" = Three Phase
"F" = Fused
Digit 13:
Voltage (See Restrictions 2 & 7)
Digit 21:
Unit Control Enhancements
"3" = 208V
"2" = Premium Controls without BacNet
"4" = 460V
"4" = Premium Controls with BacNet
"5" = 230V
"8" = 575V
Digit 24:
Customization
"-" = None
Digit 14:
Refrigerant Type (See Restriction 20)
"P" = Standard Paint, No Customizations
"-" = None
"X" = Custom Unit, No Paint
"P" = Packaged
"Z" = Custom Unit and Paint
Digit 16:
Cooling
Digit 25:
Safety Listing (See Restriction 17)
"-" = None
"L" = Listed
"C" = Chilled Water
"N" = Non-Listed
"D" = Direct Expansion
"H" = Heat Pump
"P" = Heat Pump + Hot Gas Reheat (HGRH)
"R" = Direct Exp Hot Gas Reheat (HGRH)
*NOTES:
Digits 3, 5, 15, 22, and 23 are not used in these models.
Restrictions:
1: Location Code "RT" only available with Orientation Codes "H", "V", "R" & "F".
2: Voltage Code "4" & "8" only available with Phase Code "3".
3: Heating Code "P" only available with Cooling Codes "H" or "P".
4: Heater Size Option only available with Heating Codes "E" & "G".
5: Fan Control Code "E" only available with Voltage Codes "3", "4", & "5".
6: Fan Control Code "V" only available with Phase Code "3".
7: Voltage Code "8" only available with Fan Control "V".
8: Heater Size Codes "8" & "9" are not available when Model Code is "DN-2-" and Heating Code is "E".
9: Heater Size Codes "8" & "9" are not available when Model Code is "DN-3-" or "DN-5-" and Unit Voltage Code is "3" or "5" and Fan Control Code is "V" and Heating Code is "E".
10: Heater Size Code "8" is not available when Model Code is "DN-5-" and Unit Voltage Code is "3" and Fan Control Code is "E" and Heating Code is "E".
11: Heater Size Code "9" is not available when Model Code is "DN-3-" or "DN-5-" and Unit Voltage Code is "3" or "5" and Fan Control Code is "E" and Heating Code is "E".
12: Heater Size Code "7" is not available when Model Code is "DN-5-" and Unit Voltage Code is "3" or "5" and Fan Control Code is "V" and Heating Code is "E".
