1.800.627.4499
DN-Series Integrated Programmable Controls
DOAS
130
14.0 ADVANCED SERVICE
This area gives advanced service information, as described. These screens are
used infrequently.
For the DOAS unit as well as each fan and compressor, if applicable, there is a screen that
shows the run hours as well as the number of starts. This screen also lets you specify a
threshold for alarm to alert that service is required and the ability to reset those numbers once
service is performed.
14.1 RUN HOURS AND STARTS
This screen gives information on the last time the unit was powered down as well as the length
of time the unit was powered down for troubleshooting.
14.2 LAST POWER LOSS
This screen gives information memory writes and the cycle speed of the applications. This
would normally be used to give information to TSS, if requested.
14.3 INTERNAL MEMORY WRITES
This screen will allow you to delete the alarm logs.
14.4 ALARM INITIALIZATION
ADVANCED SERVICE
