1.800.627.4499
DN-Series Integrated Programmable Controls
DOAS
144
kW for EC Motors (See Restrictions 1, 6, 7, & 8)
Coil Mode (Water Coil Only) (See Restriction 16)
1.35kW
Cooling
2.70kW
Heating
3.70kW
Cooling & Heating (Seasonal Changeover)
Fan Horspower for VFD (See Restrictions 2, 4, & 5)
Coil Style (Evaporator Coil Only) (See Restriction 10)
3 HP
Standard
5 HP
Interlaced 2 Circuits
Vibration Isolation for VFD (See Restriction 3)
Element Material (Electric Heater)
Spring
60-20-20 Ni-Cr-Fe with Nickel-Plate Terminal Pins (Standard)
Neoprene (Standard)
80-20 Ni-Cr with Stainless Steel Terminal Pins (Corrosion Resistant)
GFCI Convenience Outlet
Fuel Type (Gas Heat Module)
Yes
Natural Gas (Standard)
No
Propane
Drain Overflow Switch
Tube Material (Gas Heat Module)
Yes
409 Stainless Steel (Standard)
No
304 Stainless Steel
Paint
Elevation Range (Gas Heat Module)
None (Standard)
0–2000'
2500 Hour Salt Spray
2001'–2999'
3000'–3999'
Paint Color
4000'–4999'
White
5000'–5999'
Grey
6000'–6999'
Custom
7000' and above
Outside Air Hood Moisture Eliminator (See Restriction 18)
Control Type (Gas Heat Module)
Yes
Modulating 5:1 (Natural Gas)/3:1 (Propane) (Standard)
No
Modulating 10:1 (Natural Gas)/6:1 (Propane)
Recirculation Damper
Gas Derated (Gas Heat Module) (See Restriction 9)
Yes
Yes
No
No
Coil Tube Geometry (answered for each coil)
Combustion Inlet Type (Gas Heat Module) (See Restriction 17)
3/8" 1.000" x 0.866"
Separated Combustion (Separate combustion air intake and flue exhaust)
3/8" 1.250" x 1.0825"
Exhaust flue venting only (Combustion air intake via intake louver on unit)
1/2" 1.250" x 1.0825"
5/8" 1.500" x 1.299"
Compressor (See Restrictions 19 & 20)
5/8" 1.500" x 1.500"
1-Circuit: Qty. (1) Variable Speed
1.0" 3.000" x 2.000"
2-Circuit: Qty. (1) Variable Speed and Qty. (1) Fixed Speed
Coil Rows (answered for each coil)
Hot Gas Reheat (See Restrictions 19 & 21)
1, 2, 3, 4, 5, 6
Yes, with Suction Line Accumulator
No
Coil Fins Per Inch (answer for each coil)
6, 7, 8, 9, 10, 11, 12, 13, 14
Valves (See Restrictions 19, 20, 22, & 23)
1-Circuit: Qty. (1) Electronic Expansion Valve
Coil Coating (answer for each coil)
2-Circuit: Qty. (2) Electronic Expansion Valves
None
Electrofin UV
Condensing Fan (see Restrictions 19, 24, 25, 26, & 27)
EC Axial Fan: Qty. (1) or (2)
Coil Position (answer for each coil) (See Restrictions 11, 12, 13, 14, 15, & 28)
AC Axial Fan with VFD: Qty. (1) or (2)
Position 1 (First in direction of Airflow after fan/core)
Position 2 (Second in direction of Airflow after fan/core)
Condenser Coil Style (see Restriction 29)
Position 3 (Third in direction of Airflow after fan/core)
Standard
Position 4 (Condenser Coil only)
Face Split 2-Circuits
*NOTE: Packaged Refrigeration components are dependent on operating conditions and are automatically selected.
Restrictions:
1: Fan kW is only available with Fan Control Code "E".
2: Fan Horsepower is only available with Fan Control Code "V".
3: Vibration Isolation is only available with Fan Control Code "V".
4: Fan Horsepower "3" is only available in Model Code "DN-2-".
5: Fan Horsepower "5" is only available in Model Codes "DN-3-" & "DN-5-".
6: 1.35kW is only available in Model Code "DN-2-" & with Phase Code "1".
7: 2.70kW is only available in Phase Code "3" and Voltage Code "3" or "5".
8: 3.70kW is only available in Phase Code "3" and Voltage Code "4".
9: Gas derating question only applies for elevations above 2000'.
10: Interlaced 2 Circuits Coil Style is only available with Direct Expansion Coil or Heat Pump Coil.
11: If only one coil is selected, it must be placed in position 1.
12: Coil Position 2 only available when 2 or 3 supply air coils have been specified.
13: Coil Position 3 only available when 3 supply air coils have been specified.
14: For Cooling Codes "P" & "R", the Hot Gas Reheat Coil must be in the position directly following the cooling coil.
15: For Cooling Codes “D” & “R”, the Direct Expansion coil must be placed in position 1.
DN-Series Memo Field Questions and Answers
REFERENCE
