![RelaDyne LubriMist IVT Installation And Operating Manual Download Page 162](http://html1.mh-extra.com/html/reladyne/lubrimist-ivt/lubrimist-ivt_installation-and-operating-manual_1435628162.webp)
LubriMist
®
Model IVT
Oil Mist Generating System
Installation and Operating Manual
Page 162
of 256
The following information is designed for identifying potential problems and possible solutions on
the
LubriMist
model “IVT” Oil Mist Generator. For complete operating instructions, parts list,
electrical schematics and component locations refer to
LubriMist
Model “IVT” Oil Mist
Generating System Installation and Operating Manual
The alarm message or problem is described in the column on the left. Troubleshooting
techniques as well as possible solutions are listed in the column to the right. The Troubleshooting
steps as well as solutions are listed in order of severity. If the first solution does not clear the
alarm, then proceed on to the next possible solution. If the alarm condition still exists, the severity
of the alarm or problem may be beyond the possible solutions listed in this guide.
Please contact manufacture 800-800-5823 for further information and servicing options.
All listed alarm settings are factory values. If customers assigned values have substituted factory
values, please use customer assigned values instead.
Alarms that warrant switching mist generation to Auxiliary Unit are as follows.
•
LOW MIST DENSITY
•
LOW AIR TEMPERATURE
•
HIGH AIR TEMPERATURE
•
MIST TANK TAKING TOO LONG TO FILL
•
LOW OIL LEVEL MIST TANK LEVEL
•
HIGH AIR CUTOFF AIR TEMPERATURE
•
LOW OIL SUPPLY PRESSURE
•
HIGH OIL SUPPLY PRESSURE
When switching to the Auxiliary unit, please follow instructions located on interior of IVT cabinet
door. If procedure is not available, please refer to AUXILIARY OIL MIST GENERATOR section of
LubriMist
Model “IVT” Oil Mist Generating System Installation and Operating Manual.