LubriMist
®
Model IVT
Oil Mist Generating System
Installation and Operating Manual
Page 114
of 256
3. Hyper terminal will now setup the connection. Select the appropriate communication port by
selecting from the Connection Using pull down menu. Select Direct to COM1, COM2, or
COM3 depending on which communication port you are connected to.
4. Hyper terminal will now setup the communication port. Make the following selections as listed
below.
Bits per second
: 9600
Data bits
: 8
Parity:
None
Stop bits
: 1
Flow control
: None
Select OK when finished.
a)
Identify The Communication Port That
The IVT Oil Mist Generator Is To Be
Connected To.
b)
Select OK
a) Set Up The Communication Port
b) Press OK
