LubriMist
®
Model IVT
Oil Mist Generating System
Installation and Operating Manual
Page 103
of 256
Event Log
The IVT controller compiles a listing of occurring events and logs them chronologically in an event
log. The log maintains in memory up to sixty-three events, adding the most recent and dropping
the most aged event once 63 events have been recorded. The type of occurrences recorded in
the event log are:
1. Exceeding any high or low alarm set point for any monitored variable.
2. Changing any control set point for any controlled variable.
3. Changing any alarm set point (high or low) for any alarm variable.
4. Resetting or clearing alarm conditions
5. Application of power / Reset - interruption of power
6. Resetting the clock or date
7. Clearing the Event / Alarm Log
8. Refilling the bulk oil reservoir
To access the EVENT LOG, use the following key sequence routine. The INC and DEC keys can
be used to quickly scroll through the events in order of their occurrence
When there is no data in the EVENT LOG:
Press [ENTER]
Accesses the EVENT LOG. If there is no data in the EVENT LOG the
display will advise that the log is empty,
When there is one or more events recorded in the EVENT LOG:
Press [ENTER]
Accesses the EVENT LOG. If there is data in the EVENT LOG, the total
number of items logged is displayed.
The above screen lasts for five seconds then auto changes to display
the most recent event. Note that a number is indicated in the lower right
corner of the display. This number identifies the order of occurrence. An
event numbered as #16 occurred after the previous event numbered
#15.
Press [ENTER] again
The event #, the time, the day and the date that the event occurred is
displayed
<Last Event Description>
<Event #>
EVENT/ALARM LOG
HAS <value> ITEMS
EVENT/ALARM LOG
IS EMPTY
