Rauch AXENT Series, Operator'S Manual

Page: 84 / 170

Commissioning 6
78
Figure 6.28: Approaching with the forklift
4. Hook the spreading unit into the upper catch hook.
Check the spreading unit for secure fitting in the hook.
5. Drive away the forklift.
6. Close the catch hook.
9. Check the tight fitting of the machine.
7. Insert the bottom pin of
the spreading unit into the
elongated hole of the quick
release [1] on each side.
8. Tighten the quick release
with the handle [2].
Figure 6.29: Securing the spreading unit at
the bottom
1
2