Rauch AXENT Series, Operator'S Manual

Page: 102 / 170

Spreading operation 7
96
Example of full border spreading with normal fertilisation:
Figure 7.6: Full border spreading with normal fertilisation
Full border spreading with normal fertilisation is a type of fertiliser distribution with
which some fertiliser goes beyond the field border. This results in only slight
under-fertilization at the field border.
1. Take the values from the fertiliser chart and enter them in the Fertiliser
settings menu:

Application rate

Working width

Drop point

Limited border spreading mode: select Full bord.
2. Activate the full border spreading function in the main menu .

The settings from the Fertiliser settings menu are applied.

The currently selected mode appears at the top of the operation screen.
3. Follow the instructions in the AXENT ISOBUS operating manual.
NOTICE
The display on the screen may vary depending on the configured software
version.

Observe the operating manual for the AXENT ISOBUS electronic machine
control unit.