Rauch AXENT Series, Operator'S Manual

Page: 158 / 170

General maintenance and servicing 9
152
Wheel mounting:

Before mounting the wheel, clean the contact surface of the wheel at the hub.

Before mounting the wheel, check the wheel nuts and wheel bolts. Replace
any damaged, stiff or rusty wheel nuts or wheel bolts.

Tighten all wheel nuts stepwise and crosswise with a torque wrench.
- Tighten the wheel nuts with a tightening torque of 560 Nm .
- Screw and tighten all 10 wheel nuts per wheel.
The wheel nuts loosen due to setting procedures during the first few kilometres
with the brand new large area spreader or after changing a wheel.

Re-tighten all wheel nuts with the prescribed tightening torque after driving
50 km .
NOTICE
Observe the instructions and prescribed operations of the wheel manufacturer
for the wheel mounting.