Rauch AXENT Series, Operator'S Manual

Page: 86 / 170

Commissioning 6
80
4. Drive the forklift with a pallet under the spreading unit.
5. Lift up the spreading unit until the coupling points are free.
6. Drive away the forklift and place the spreading unit on a pallet at a suitable stor-
age location.
Before attaching the other spreading unit, assembly or disassembly steps will be nec-
essary, depending on the type of spreading unit. Note the following sections

When converting to the AXIS-PowerPack fertiliser spreading unit:
-
6.7.4: Installing the separating plate (AXIS-PowerPack), page 72
- 6.7.5: Installing the feeder mesh (AXIS-PowerPack), page 74

When converting to the LIME-PowerPack lime spreading unit:
-
6.7.2: Dismantling the feeder mesh (LIME-PowerPack), page 70
- 6.7.3: Dismantling the separating plate (LIME-PowerPack), page 71
7. Attach the spreading unit as described in chapters 6.7.6: Attachment of the
spreading unit, page 77 and 6.7.7: Establishing connections, page 79 .
1. Release the quick release [1]
with the handle [2].
2. Pull the quick release towards
yourself.
 The bottom pin of the
spreading unit is free.
Figure 6.32: Securing the spreading unit at
the bottom
3. Open the lock [1] of the
upper catch hooks on
each side.
Figure 6.33: Securing the spreading unit at
the bottom
1
2
1