Rauch AXENT Series, Operator'S Manual

Page: 78 / 170

Commissioning 6
72
6.7.4 Installing the separating plate (AXIS-PowerPack)
The separating plate is pre-installed at the factory and serves to distribute the fer-
tiliser evenly in both hopper sections of the AXIS-PowerPack spreading unit. If
you change the spreading unit regularly, reinstall the separating plate and the
feeder mesh (
“Installing the feeder mesh (AXIS-PowerPack)”, page 74 ) at the
machine outlet before attaching the AXIS-PowerPack spreading unit .
Figure 6.20: Inserting the separating plate in guides
[1] Sheet guide
[2] Guide holder
1. Install the separating plate
[1] horizontally between the
holder and the spreading unit
hopper [2].
2. Position the separating plate
vertically.
Figure 6.19: Installing the separating plate
2
1
2
1