Safety
9
3
3.5.3
Checks before start-up
Check the operational safety of the machine before the first and every
subsequent start-up.
Is all safety equipment at the machine installed and functioning?
Are all fasteners and load-bearing connections tight and in proper condition?
Are all locks firmly closed?
Is the hazard zone of the machine clear of persons?
Is the universal drive shaft guard in good condition?
3.5.4
Hazard zone
Ejected spreading material can cause serious injuries (e. g. to the eyes).
When persons are present between the tractor and the machine, there is a great
hazard caused by the tractor rolling away or by machine movements which may
have fatal consequences.
The following figure displays the hazard zones of the machine.
Figure 3.1:
Hazard zones around attachment units
[A] Danger zone in spreading mode
[B] Danger zone when coupling/uncoupling the machine and the spreading unit
For this reason, ensure that nobody is within the spreading area [A] of the
machine.
Immediately stop the machine and the tractor if somebody is within the
danger zone of the machine.
Instruct everyone to leave the danger zones [B] when coupling/uncoupling the
machine to or from the tractor or when hitching/unhitching the spreading unit.
NOTICE
For more information on the rear view camera, see
A
B
Summary of Contents for AXENT Series
