Rauch AXENT Series, Operator'S Manual

Page: 76 / 170

Commissioning 6
70
6.7.2 Dismantling the feeder mesh (LIME-PowerPack)
Dismantle the feeder mesh if you are using the LIME-PowerPack spreading unit
for spreading work. This will avoid bridging due to lime in the container.
Requirements

Position an empty pallet with forklift at the height of the edge of the container.

Secure the forklift against rolling away.

Place all parts of the feeder mesh securely on the pallet.
Figure 6.16: Unlocking the holders
[1] Adjustment lever
[2] Locking the mesh supports
1. Unlock all four mesh supports with a lock.

The parts of the feeder mesh are free.
2. Remove the parts of the feeder mesh and place them on the pallet.
3. Remove the mesh supports and place them on the pallet.
4. Remove the pallet and stow it safely away.

The feeder mesh is now dismantled.
2
1