Rauch AXENT Series, Operator'S Manual

Page: 26 / 170

Safety 3
20
3.11 Warning and instruction stickers
Various warnings and instructions have been applied to the machine
(for information on application to the machine, see
Figure 3.2 to Figure 3.4 )
The warnings and instructions are part of the machine. They must not be
removed or modified. Missing or illegible warnings or instructions must be
replaced immediately.
If new components are installed during repair work, the same warnings and
instructions that were on the original parts must be applied to the new parts.
3.11.1 Warning notice stickers
NOTICE
The correct warning and instruction notices can be obtained from the spare parts
service.
Read the operating manual and warnings.
Read and observe the operating manual and warning notices
before starting the machine.
The operating manual provides detailed instructions on
operating the machine and provides useful information on
handling, maintenance and cares.
Remove the ignition key
Before carrying out any repair and maintenance work, shut
off the motor and remove the ignition key. Disconnect the
power supply.
Danger of ejection of material
Danger of injury to the whole body due to ejected spreading
material
Direct all persons out of the danger zone (spreading area) of
the machine before the start-up.
Danger due to moving parts
Risk of body parts being cut off
It is forbidden to enter the danger zone of the rotating
spreading discs or guide rollers of the conveyor belt.
Switch off the motor and remove the key before carrying out
maintenance, repair and adjustment work.