Rauch AXENT Series, Operator'S Manual

Page: 111 / 170

Spreading operation
105
7
7.5 Spreading lime (LIME-PowerPack)
7.5.1 Spreading operation procedure with AXENT 100.1
The intended use of the machine includes compliance with the operating, main-
tenance, and service conditions in accordance with the manufacturer specifica-
tions.
Spreading therefore always includes preparation and
cleaning/maintenance .

Carry out spreading work according to the sequence described below.
Preparation

Attaching the large area spreader to the tractor Page 57

Removing the feeder mesh and separating plate

Attaching the lime spreading unit to the large area
spreader Page 57

Closing the pre-metering sliders

Filling the machine Page 81

Making machine settings (density, travel speed,
application rate etc.)
See the operating manual
for the AXENT ISOBUS
device control

Travel to the spreading location
Spreading operation

Switching on the PTO shaft

Opening the pre-metering sliders and starting the
spreading operation

Starting the spreading work

Finishing the spreading operation and closing the
pre-metering sliders

Switching off the PTO shaft
Cleaning/maintenance

Discharging residual material

Cleaning and maintenance Chapter 9

Switching off the large area spreader Page 112