Rauch AXENT Series, Operator'S Manual

Page: 118 / 170

Spreading operation 7
112
7.7 Switching off and uncoupling the large area spreader

Park the empty machine on level ground.
1. Drive the entire train to a level, solid storage area.
2. Switch off the engine of the tractor and remove the ignition key.
Pneumatic brake system
1.
Pull the button [1] of the parking brake.
 The parking brake is applied.
Figure 7.20: Releasing the manual parking brake
[1] Parking brake
[2] Service brake
n
WARNING
Danger due to tipping
The AXENT 100.1 large area spreader is a single-axle vehicle.
The large area spreader can tip over in the event of one-sided
rear-heavy loading. This may result in personal injury and material
damage.
 Park the large area spreader on level, solid ground.
 Never uncouple the large area spreader from the tractor in
the event of one-sided rear-heavy loading.
1 2