Rauch AXENT Series, Operator'S Manual

Page: 66 / 170

Commissioning 6
60
6.6.1 Connecting the ball coupling (variant A)
1. Start the tractor.

The PTO shaft is switched off.

The hydraulic system is switched off.

The hold-down device of the ball coupling is open.
2. Position the tractor's ball coupling exactly under the machine's coupling
bracket.
3. Apply the handbrake of the tractor.
4. Actuate the control valve on the tractor until the support stand is completely
retracted.
Figure 6.8: Retracting the support stand
5. Switch the tractor motor off. Remove the ignition key.
6. Close the hold-down device.
Observe the instructions of the tractor manufacturer.
 The connection is secured.