Rauch AXENT Series, Operator'S Manual

Page: 101 / 170

Spreading operation
95
7
Example of limited border spreading with normal fertilisation:
Figure 7.5: Limited border spreading with normal fertilisation
Almost no fertiliser goes beyond the field border during limited border spreading
with normal fertilisation. In this case, under-fertilisation at the field border must be
accepted.
1. Take the values from the fertiliser chart and enter them in the Fertiliser
settings menu:

Application rate

Working width

Drop point

Limited border spreading mode: select Limited bd

Quantity reduction
2. Activate the limited border spreading function in the main menu .

The settings from the Fertiliser settings menu are applied.

The currently selected mode appears at the top of the operation screen.
3. Follow the instructions in the AXENT ISOBUS operating manual.
NOTICE
The display on the screen may vary depending on the configured software
version.

Observe the operating manual for the AXENT ISOBUS electronic machine
control unit.