Rauch AXENT Series, Operator'S Manual

Page: 154 / 170

General maintenance and servicing 9
148
9.11.5 Maintenance of hydraulic system / control block
The control block is used to supply all drive and actuating functions that are
actuated from the electronic control.
Figure 9.30: Control block
The serviceable components of the hydraulic system are:

The hydraulic cylinders of the pre-metering sliders

The hydraulic motor of the conveyor belt drive

The hydraulic cylinders used to drive the hopper cover
Checking the hydraulic cylinders for actuating functions
Check all hydraulic cylinders regularly, but at least before any spreading work.
Actuating functions: hydraulic
cylinders [1] of the pre-metering
sliders.
Figure 9.31: Hydraulic cylinders of
pre-metering sliders
1