Rauch AXENT Series, Operator'S Manual

Page: 18 / 170

Safety 3
12
3.8 Maintenance and servicing
Additional hazards that do not occur during operation of the machine are present
during maintenance and servicing work.

Any maintenance and service work is to be conducted with increased
alertness at all times. Work particularly thoroughly and cautiously.
3.8.1 Qualifications of maintenance personnel

Only specialist workshops or recognized brake service providers are allowed
to carry out adjustment and repair work on the brake system.

Only qualified personnel are allowed to repair tyres and wheels. They must
use suitable assembly tools for this purpose.

Welding and work on the electrical and hydraulic systems is to be carried out
by qualified technicians only.
3.8.2 Wear parts

The maintenance and service intervals described in the present operator's
manual are to be strictly adhered to at all times.

Furthermore, the maintenance and service intervals of the supplier compo-
nents must also be complied with. See the supplier documentation for the
relevant intervals.

Have the condition of the machine checked after every season by your spe-
cialist dealer, paying particular attention to its fastening components, safety-
relevant plastic components, hydraulic system and metering parts.

Spare parts must at least comply with the technical requirements specified by
the manufacturer. The technical standards are ensured by using genuine
spare parts.

Self-locking nuts are designed to be used only once. Always use new
self-locking nuts to fasten components (e. g. covers).