Rauch AXENT Series, Operator'S Manual

Page: 115 / 170

Spreading operation
109
7
7.5.3 Setting the machine for lime spreading
The pre-metering sliders and the speed of the conveyor belt as a function of the
driving speed determine the spreading quantity for the spreading of lime.
1. Activate the lime AUTO km/h operating mode in the AXENT ISOBUS
electronic machine control unit.
2. Make the settings:

Working width

Application rate

Spreading disc type

Flow factor
You can take the settings from the table below.
Application rates at 10 km/h and 30 cm pre-metering slider opening
3. Start lime operation by means of the AXENT ISOBUS machine control unit.
 The conveyor belt starts.
 The comb roller starts.
NOTICE
The overload function of the machine in connection with the lime spreading unit
is described in a separate operating manual for the electronic control. This
operating manual is part of the AXENT ISOBUS electronic control.
Type of lime Density
(kg/m³) Grinding
stage Dry
substance
(%) Working
width
(m) Max. quantity
(kg/ha)
Quicklime, ground 1100 1 100 10 9700
Quicklime, grained 1100 - 100 18 5380
Converter lime 1300 2 90 15 7640
Carbonation lime 1000 - 72 12 7340
Mixed lime 1100 2 88 12 8080
Carbonated lime 1200 2 92 12 8810
Magnesium line 1200 1 94 10 10580
Black lime 900 1 83 12 6610