Copyright © 2019, iDTRONIC GmbH
Reproduction, adaption or translation without prior written permission is prohibited, except as allowed
under copyright laws. The information contained in this document is subject to change without notice.
Quickstartguide for iDTRONIC UHF RFID Readers
(R-DT-EVO-UHF and R-STICK-EVO-UHF)
Installation UHF-Version
Please refer to this installation guide to start both software and reader successfully.
1. Download the appropriate software from:
https://www.idtronic-rfid.com/support/sdks
2. Unpack the zip folder to a folder of your choice.
3. Open the folder
“Card Reader UHF SDK”
or
“Embedded UHF SDK_R830”
and
then open the folder
“06_Demo Software”
.
4. Start the file
“iDTRONIC - Reader Demo Tool Setup 1.61.33d.exe”
(or newer
version) and follow the installation procedure.
5. Connect the reader to USB-Port of your computer.
6. Check in the Windows Device Manager if the driver for the USB-Port is installed.
If it is not installed, then click on this driverless port and select update driver-software,
please use the driver from the folder
“04_USB-Drivers”
.
7. After successful installation, start the software at menu item
“iDTRONIC - Reader
Demo Tool
”
in programs.
8. Open the dropdown menu
“Reader”
and select add, and then select your Reader.