R&S 1311.6010K22, User Manual

Page: 912 / 1611

Command reference
R&S
®
ZNB/ZNBT
912 User Manual 1173.9163.02 ─ 62
Manual operation: See "Load File" on page 632
CALCulate:FMODel:ISD:DUT:MEASure:FILename:CLEar
Invalidates the file path previously set using
CALCulate:FMODel:ISD:DUT:
MEASure:FILename
.
Usage: Event
Manual operation: See "Load File" on page 632
CALCulate:FMODel:ISD<Ph_pt>:DUT[:STATe] <Boolean>
For a fixture modeling with the ISD tool, this command allows to specify the ports to
which the test fixture is connected.
This has to be defined before measuring DUT + Fixture (using
CALCulate:FMODel:
ISD:DUT:MEASure
).
Suffix:
<Ph_pt>
.
Physical port number
Parameters:
<Boolean> 1 (ON, true) if the test fixture is connected to port <Ph_pt>, 0
(OFF, false) otherwise
Example: See Chapter 8.2.8, "Fixture modeling" , on page 1527
Manual operation: See "Active" on page 632
CALCulate:FMODel:ISD:DUT:TYPE <DUTType>
Defines whether the DUT is active or passive.
Corresponds to the
active_dut
batch mode parameter of the ISD tool.
Parameters:
<DUTType> PASSive | ACTive
Manual operation: See "DUT Type" on page 637
CALCulate:FMODel:ISD:FTIMe:DUT <FltDutAndLeadIns>
If
CALCulate:FMODel:ISD:FTIMe:OVERride
is set to TRUE, this command allows
to set the flight time for DUT + Lead-ins manually.
This is equivalent to setting the
leadin_dut_time
batch mode parameter of the ISD
tool to a numeric value (not
auto
).
Parameters:
<FltDutAndLeadIns> Default unit: s
Manual operation: See "DUT + lead-ins flight time" on page 636
SCPI command reference