Rackable Systems OmniStor 4700S Series, User Manual

Page: 59 / 108

Chapter 4 - Managing and Monitoring
LED Matrix
47
LED Matrix
The RAID Controller has control of the Drive Status and Drive Activity LEDs. These
LEDs, located on the front bezel, present the status information in the form of different
colors and states (steady and flashing), as well as corresponding audible alarms.
Front Bezel LED & Audible Alarm Matrix
Condition Drive Status LED Channel Status LED Audible Alarm
Power Up
Steady Amber until
the Controller is ready,
then Steady Green.* Steady Amber until
the Controller is ready,
then Steady Green. Short Beep.
Controller Soft Boot/Reset
Steady Amber until
the Controller is ready,
then Steady Green.* Steady Amber until
the Controller is ready,
then Steady Green. N/A
Empty Drive Slot
Off. N/A N/A
Drive Ready - Not Assigned to
an Array
Blinking Green. N/A N/A
Drive Ready - Assigned to an
Array
Steady Green. N/A N/A
Drive Failure
Blinking Amber (All
other drive members
are Steady Amber). Steady Amber. Continuous Beep.
Dedicated Spare Ready -
Assigned to an Array
Fast Blinking Green. N/A N/A
Dedicated Spare Rebuilding
Blinking Amber &
Green. Steady Amber N/A
Global Spare Ready - Not
assigned to a specific Array.
Fast Blinking Green. N/A N/A
Global Spare Rebuilding
Blinking Amber &
Green. Steady Amber. Continuous Beep.
Array Failure
Failed Drive(s)
Blinking Amber,
Good Drives Steady
Amber. Steady Amber. N/A
Array Initializing
Drive Members
Steady Green. Steady Green. N/A
* The Drive Status LED, after successful power up, may be steady green, blinking green, steady amber or blinking amber
depending on the state of the drive. Refer to the other conditions to confirm the correct Drive Status LED state.