Rackable Systems OmniStor 4700S Series, User Manual

Page: 37 / 108

Chapter 3 - Setup and Installation
Installing the Enclosure into the Rack Cabinet
25
4
Locate the mounting rails and mounting hardware in the accessory kit (some
installations require cage nuts and others use standard nuts).
NOTE:
It will be helpful to have an assistant available during the installation.
5
Install the rear mounting rails.
Secure the left and right mounting rail to the rack cabinet vertical supports using the
screws and nuts provided.
Attaching the Rails
6
Lift the enclosure into the rack cabinet and align the rear mounting rails with the slots
at the rear of the enclosure, then slide the enclosure onto the rails.
7
Secure each front mounting ear to the vertical support using the supplied screws and
nuts.
NOTE:
Ensure the enclosure is level.
RS
-232
DTE
HOST
CH
1
HOST
CH
0
HOST
CH
1
HOST
CH
DR
T
H
1
A
B
K
1
A
P
W
R
H
0
A
B
K
0
A
Rear Rack Vertical Support
Nut
Nut
Mounting
Screws
Rail Slot
Rail Slot