Chapter 4 - Managing and Monitoring
Status Indicator LEDs
44
Status Indicator LEDs
The Status Indicator LEDs located above the Alarm Reset button and comprise the
Power-On LED, Channel Status LED, Power Supply Status LED, and Fan Status LED.
The following are descriptions of the LEDs.
Front Bezel LEDs
Power-On LED
The Power-On LED signifies that the enclosure is powered on and will be illuminated
green when power has been applied.
Channel Status LED
The Channel Status LED indicates the status of the logical array(s). The LED will change
to amber when the system detects a problem with a logical array.
Power Supply Status
The Power Supply Status LED indicates the condition of the power supplies. The LED will
illuminate green when both power supplies are functioning normally and will change to
amber if one of the power supplies should fail or is turned off.
A suspect faulty power supply can also be identified by the illumination of the amber
“Fault” LED located on the individual power supply.
Summary of Contents for OmniStor 4700S Series
