Rackable Systems OmniStor 4700S Series, User Manual

Page: 64 / 108

Chapter 4 - Managing and Monitoring
Updating Controller Firmware
52
By pressing and holding down the <Enter> key, the controller will automatically sense
and set the baud rate during boot.
This process takes you to what is called the “Monitor mode.” Once in Monitor mode
(command prompt displayed), type “rs” and press <Enter>. This will restart the
controller using the corrected baud rate.
8
If the menu system does not automatically appear after the controller has completed
its boot cycle, at the screen cursor type <Control-E>. Then type <Control-W> to
switch the interface to the menu-based mode.
9
From the Main menu, select the Diagnostics Menu and press <Enter>.
Diagnostics Menu Screen
10
Use the <Up> and <Down> Arrow keys to select Online Diagnostics and press
<Enter>.
Online Diagnostics Menu Screen